How to Choose the Right DYISLAND Brake Pads
A simple guide to finding the right replacement for your brakes.
Looking for replacement pads for your DYISLAND brakes? Start with your brake model and the shape of your existing pads.
Pads that look similar may have different dimensions or mounting features. This guide introduces the DYISLAND pad range and explains what to check before ordering.
Find Your Brake Pad Model
Use the table below as a starting point, then compare your existing pads with the relevant product image.
| Brake Pad Model | DYISLAND Brake Models |
|---|---|
| MT1S | LD-100 |
| MT2S | LD-200, LD-210, LD-240 |
| MT3S | SD-200,SD-230, SD-230X |
| MT4S | XT-7,XT-8, SD-200/LD-2024 and SD-230,SD-230X |
| MT600 | LD-200PLUS, LD4X-300 |
| SD4S | SDM4 |
| AT | ATM4 |
Check the complete pad shape and dimensions before purchasing, especially if your brake model or version is unclear.
Explore the DYISLAND Brake Pad Range
MT1S — Replacement Pads for LD-100
The MT1S features a rounded backing plate with an extended upper tab. It is the replacement pad model for DYISLAND LD-100 brake calipers.
Before ordering: Compare the rounded outline, upper tab, and retaining hole with your original pads.
MT2S — Replacement Pads for LD-200, LD-210 and LD-240
The MT2S has a compact rectangular profile with an upper retaining hole. It is used in DYISLAND LD-200, LD-210, and LD-240 brake calipers.
Before ordering: Check the backing plate shape, retaining hole position, and dimensions against your existing pads.
MT3S — Replacement Pads for SD-200, SD-230 and SD-230X
The MT3S is the replacement pad model for DYISLAND SD-200, SD-230 and SD-230X brake calipers. Use the reference image to compare the full pad outline and upper structure.
Before ordering: Confirm your caliper model and compare the pad dimensions, including any cooling fins.
MT4S — Replacement Pads for XT-7 and Other Compatible Models
The MT4S is used in DYISLAND XT-7,XT-8, SD-200/LD-2024 and SD230,SD230X ,SDM4 brake calipers. Its compact profile should be checked carefully against your original pads.
Before ordering: Compare the backing plate outline, mounting features, and measurements.
MT600 — Replacement Pads for LD-200PLUS and LD4X-300
The MT600 is the replacement pad model for DYISLAND LD-200PLUS and LD4X-300 brake calipers.
These two brake systems use different piston configurations, so identifying the correct pad model is more useful than choosing by piston count alone.
Before ordering: Confirm the brake model and compare the complete backing plate shape and dimensions.
SD4S — Check the Shape and Fit
The SD4S features a distinctive cutout backing plate design. When choosing replacement pads, compare the complete outline and mounting features with your existing pads.
Before ordering: Check the pad dimensions, retaining hole position, and caliper compatibility shown on the product page. A similar appearance alone does not confirm fit.
AT — Replacement Pads for ATM4
The AT pad is designed for the DYISLAND ATM4 brake caliper. Compare the complete backing plate, including the upper tabs and retaining hole, when identifying a replacement.
Before ordering: Check the dimensions and select from the material options available on the product page.
What to Check Before Ordering
1. Identify your brake model.
Look for the model name on your brake caliper or check your original order.
2. Compare the complete pad shape.
Check the backing plate outline, retaining hole, tabs, and any cooling fins.
3. Check the dimensions.
Measure from the same points shown in the product image. Make sure thickness measurements refer to the same part of the pad.
4. Choose an available material.
Check the product page for the compounds offered for your pad model. Material options can vary between models.
Need Help Finding the Right Pads?
Send us clear photos of your brake caliper and existing pads, together with the brake model if you know it. Our team can help you identify the correct replacement.
Email: dyislandemliy@gmail.com
